Centers, Arbors & Depth Stop
Top to bottom: dead center, live center,
original design drill chuck drawbar adapter &
depth stop for chucks. The live center has
a tension adjustment hex screw
inside its end.
Dead center is threaded to allow mounting of accessories
like a drill chuck or
a die holder.
Top: Newer design
for the
Taig mill
ER-16 spindle, ⅜-24 drill chuck arbor with
⅜" shaft .
Bottom: Upgraded Taig lathe chuck arbor.
Taig lathe with
drill chuck arbor that threads onto the spindle nose.
The original design used a drawbar.
See additional
chuck arbors here.